You have no items in your shopping cart.
Pipe Tools
10 Item(s)
per page
-
Pipe Bender
£12.48This product is designed to bend three sizes of pipe including 3mm/4mm/6mm (1/8"-3/16"-1/4"). Aluminium body * A brake pipe bender able to bend three sizes of pipe. * Sizes of pipe can bend: 3mm | 4mm | 6mm (1/8" | 3/16" | 1/4"). * Will allow brake pipes to be bent at 45º or 90º. * Suitable for use on aluminium, steel or copper tubing. * Complete with aluminium body and instructions on packaging. Learn More -
Pipe Bender 3 in 1
£19.42Suitable for bending brake pipes this tool will accept 6/8/10mm pipes and bends 45 or 90 degrees Bends 45 or 90° Suitable for pipes 6/8/10mm Suitable for brake pipes 3 tools in one Time saver Learn More -
Brake Pipe Flaring Tool
£21.99For single or double lap flares in soft copper and aluminium pipe.
Suitable for 3/16, 1/4, 5/16, 3/8 and 1/2" O/D pipes.
Pipe clamp, 45° spreader and five dies.
Packed in handy plastic case.
Display packed.
Learn More -
Flaring Tool - In Situ
£27.99This flaring tool kit can be easily used with the pipe in position on the vehicle etc. and can be used on copper, brass and aluminium tubing. Produces male, female and double flares on 5mm to 16mm diameter pipes/tubes. Spare die bar available Part No 0360. Use insitu Produces male and female double flares Flares pipes from 5mm to 16mm diameter Spare die bar available Part No 0360 Use on copper, brass and aluminium tubing Learn More -
Flaring Tool 10pc
£28.25The Laser Flaring Tool kit is a comprehensive, yet simple to use kit, suitable for cutting and flaring copper, brass and thin walled aluminium tubing.
Cuts tube from 3mm dia to 30mm and pipe 5mm to 16mm.
Produces high quality 45 degree flares, Male and Female.
Dies include 3/16", 1/4", 5/16", 3/8", 7/6",1/2" and 5/8".
Spare dies available
Produces male and female flares.
Cuts tube from 3mm to 30mm diameter. 45 degree flares.
Flares copper, brass and thin walled aluminium tubing. Blow mould case.
Learn More -
Brake & Fuel Line Bending Pliers
£29.12Special shaped jaws bend 3/16" and 1/4" brake and fuel lines without distortion. Forged steel construction with cushion grips * Special shaped jaws. * Bend 3/16" and 1/4" brake and fuel lines. * Forged steel. * Cushioned grips. * Bends without distortion. Learn More -
Brake Pipe Flaring Tool Kit
£126.25Hydraulic Brake Flaring tool for use in-situ on the vehicle and suitable for producing SAE (3/16"& 1/4") and DIN 45 degree (3/16" & 1/4") flares. Capable of working on steel brake pipes. Complete with reamer for de-burring. Packed in a metal case for storage. * Designed for ease of use. Produces high quality pipe flares on the vehicle. * Capable of working on steel brake pipes. * Creates SAE and DIN single and double flares (3/16" and 1/4" pipe). * Complete with reamer for deburring. * Packed in a metal case for storage. Learn More -
Draper Expert Brake Pipe Flaring Tool Kit
£153.00Expert Quality, for single and double lap flares in soft copper, steel and stainless steel brake pipes. Quick change split die blocks for rapid set up with sliding yoke and quick lift die block clamp. Eight way rotating forming die with 5mm, 6mm, 3/16" SAE, 1/4" SAE, 3/8" SAE and 5/16" SAE split die blocks. Display packed in blow mould case. Learn More -
Brake Flaring Tool Set – Hydraulic
£192.52This new product utilises a patented design to quickly produce high quality SEA and DIN flares on or off of the vehicle. The tool works on Cupro-Nickel and Steel pipes as well as coated steel piping. The set incorporates the tools to flare 4.75mm, 5mm and 6mm pipes by using the correctly sized die and punches. * Handles Cupro-Nickel and steel pipes. * High quality SEA and DIN flares. * Use in-situ. * Patented. * Flares 4.75mm, 5mm and 6mm pipes. Learn More -
Brake Pipe Flaring Tool
£242.68This Brake Flaring Tool Set is designed to be used in conjunction with a bench vice. The set comprises of 4 sizes of clamping blocks for holding the brake pipes (3/16”(4.75mm), ¼”, 5/16” & 3/8”) The Turn Key has dies for producing singe and double flares in 4.75mm, 3/16”, ¼”, 5/16” & 3/8”. Spare dies are available. Supplied in a blow moulded case for storage. Designed to use in conjunction with a bench vice. The turn key has dies for producing single and double flares in 4.75mm | 3/16" | 1/4" | 5/16" | 3/8". The set comprises of 4 sizes of clamping blocks for holding the brake pipes (3/16"(4.75mm), 1/4" | 5/16" | 3/8"). Spare dies are also available. Supplied in a blow mould case. Learn More
10 Item(s)
per page
Shop By
Shopping Options
- Fitting Position
-
- Rear (1)
- Part Number
-
- H000412 (1)
- Price
-
- £0.00 - £100.00 (6)
- £100.00 - £200.00 (3)
- £200.00 - £300.00 (1)
- Start Year
-
- 1997 (1)
Community Poll
