The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment. A Health and Safety Guide has been produced which covers the use of pneumatic equipment. The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or hand held. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1.5m long), thus isolating the plug and socket from the tool vibration." The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling. Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 4414:1998, EN 983:1996, ISO 6150:1988 and Health & Safety Executive Guide HS(G) 39 Learn More

The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment. A Health and Safety Guide has been produced which covers the use of pneumatic equipment. The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or hand held. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1.5m long), thus isolating the plug and socket from the tool vibration." The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling. Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 4414:1998, EN 983:1996, ISO 6150:1988 and Health & Safety Executive Guide HS(G) 39 Learn More

PCL's 8mm (5/16") and 10mm (5/16") air hose is a Rubber PVC Alloy (PTE) compound; it looks and feels like rubber but doesn't have the downsides associated with rubber. Available in popular cut lengths complete with Vertex Coupling and Standard Adaptor ends, thereby saving you time and the need for expensive crimping equipment. Just plug in and go. Key Product Benefits Excellent abrasion resistance Good flexibility and kink resistant Resistance to oil and fuels Silicone free Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 5774:2008 (BS 6066:1981) Exceeds BS EN ISO 2398:1997 (BS 5118:1980) Learn More

PCL's 8mm (5/16") and 10mm (5/16") air hose is a Rubber PVC Alloy (PTE) compound; it looks and feels like rubber but doesn't have the downsides associated with rubber. Available in popular cut lengths complete with Vertex Coupling and Standard Adaptor ends, thereby saving you time and the need for expensive crimping equipment. Just plug in and go. Key Product Benefits Excellent abrasion resistance Good flexibility and kink resistant Resistance to oil and fuels Silicone free Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 5774:2008 (BS 6066:1981) Exceeds BS EN ISO 2398:1997 (BS 5118:1980) Learn More

PCL's 8mm (5/16") and 10mm (5/16") air hose is a Rubber PVC Alloy (PTE) compound; it looks and feels like rubber but doesn't have the downsides associated with rubber. Available in popular cut lengths complete with Vertex Coupling and Standard Adaptor ends, thereby saving you time and the need for expensive crimping equipment. Just plug in and go. Key Product Benefits Excellent abrasion resistance Good flexibility and kink resistant Resistance to oil and fuels Silicone free Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 5774:2008 (BS 6066:1981) Exceeds BS EN ISO 2398:1997 (BS 5118:1980) Learn More

PCL's 8mm (5/16") and 10mm (5/16") air hose is a Rubber PVC Alloy (PTE) compound; it looks and feels like rubber but doesn't have the downsides associated with rubber. Available in popular cut lengths complete with Vertex Coupling and Standard Adaptor ends, thereby saving you time and the need for expensive crimping equipment. Just plug in and go. Key Product Benefits Excellent abrasion resistance Good flexibility and kink resistant Resistance to oil and fuels Silicone free Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 5774:2008 (BS 6066:1981) Exceeds BS EN ISO 2398:1997 (BS 5118:1980) Learn More

PCL's 8mm (5/16") and 10mm (5/16") air hose is a Rubber PVC Alloy (PTE) compound; it looks and feels like rubber but doesn't have the downsides associated with rubber. Available in popular cut lengths complete with Vertex Coupling and Standard Adaptor ends, thereby saving you time and the need for expensive crimping equipment. Just plug in and go. Key Product Benefits Excellent abrasion resistance Good flexibility and kink resistant Resistance to oil and fuels Silicone free Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 5774:2008 (BS 6066:1981) Exceeds BS EN ISO 2398:1997 (BS 5118:1980) Learn More