The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment. A Health and Safety Guide has been produced which covers the use of pneumatic equipment. The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or hand held. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1.5m long), thus isolating the plug and socket from the tool vibration." The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling. Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 4414:1998, EN 983:1996, ISO 6150:1988 and Health & Safety Executive Guide HS(G) 39 Learn More

The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment. A Health and Safety Guide has been produced which covers the use of pneumatic equipment. The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or hand held. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1.5m long), thus isolating the plug and socket from the tool vibration." The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling. Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 4414:1998, EN 983:1996, ISO 6150:1988 and Health & Safety Executive Guide HS(G) 39 Learn More

Specially designed to allow PCL couplings and adaptors to be fitted to 1/4 NPT threads Learn More

The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment. A Health and Safety Guide has been produced which covers the use of pneumatic equipment. The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or hand held. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1.5m long), thus isolating the plug and socket from the tool vibration." The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling. Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 4414:1998, EN 983:1996, ISO 6150:1988 and Health & Safety Executive Guide HS(G) 39 Learn More

The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment. A Health and Safety Guide has been produced which covers the use of pneumatic equipment. The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or hand held. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1.5m long), thus isolating the plug and socket from the tool vibration." The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling. Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 4414:1998, EN 983:1996, ISO 6150:1988 and Health & Safety Executive Guide HS(G) 39 Learn More

The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment. A Health and Safety Guide has been produced which covers the use of pneumatic equipment. The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or hand held. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1.5m long), thus isolating the plug and socket from the tool vibration." The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling. Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 4414:1998, EN 983:1996, ISO 6150:1988 and Health & Safety Executive Guide HS(G) 39 Learn More

The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment. A Health and Safety Guide has been produced which covers the use of pneumatic equipment. The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or hand held. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1.5m long), thus isolating the plug and socket from the tool vibration." The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling. Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 4414:1998, EN 983:1996, ISO 6150:1988 and Health & Safety Executive Guide HS(G) 39 Learn More

The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment. A Health and Safety Guide has been produced which covers the use of pneumatic equipment. The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or hand held. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1.5m long), thus isolating the plug and socket from the tool vibration." The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling. Specifications Working pressure @ 20°C: 300lbf/in² (21bar) Burst Pressure: 63bar (3:1 safety factor) Temperature Range: -10°C to 60°C Please note - an increase in temperature above 20°C will affect the working pressure quoted above. Approvals Conforms to ISO 4414:1998, EN 983:1996, ISO 6150:1988 and Health & Safety Executive Guide HS(G) 39 Learn More

PU Coiled Air Hose Assemblies overcome the limitations of nylon, such as kinking, abrasion and resistance to oils, and increases the effective working temperature range. The use of PU allows use in any direction with the elimination of hose kinks aiding air flow. It also provides ease of use when attached to tools, helps protect tool ends and leaves the work area clear of entanglements and trip hazards. A range of hose sizes, working lengths and colour is available. Key Product Benefits Polyurethane (PU) material Nickel plated 360° swivel fittings 200m straight ends with spring guard Hose recoils to a fraction of it's working length Range of hose sizes, working lengths and a choice of colour Specifications Maximum working pressure: 200lbf/in² (14bar) Learn More