This camshaft locking tool is specifically designed for use on Vauxhall/Opel 1.8/2.0 16 Ecotec engines. Specifically for use on Vauxhall/Opel 2.0/2.2 16v Eco-Tec engine Aluminium body Twin camshaft sprocket tool OEM ref KM 853 Time saver Learn More

The camshaft locking tool can be used in conjunction with Part No 2629 and enables the timing position of the Camshaft to be held whilst the Timing Belt is attached. The Flywheel TDC Setting Bracket is attached to the flywheel housing to give the position against which to align the flywheel top dead centre mark. The Flywheel Locking Pin is suitable for use on models which have a two part oil pan. The pin in inserted through the bell housing into the flywheel. The spring and ring are placed over the head of an adjacent bolt to prevent the pin from dropping out. For 1.7 engines built before 2001. OEM Ref KM 661-2, KM 851 and KM 951. Aor Astra-F/G, Cavalier, Vectra-A with 17DR, X17DT, DTL engines. Time saving tool. Belt driven engines Learn More

Camshaft alignment pin (KM 6340) and tensioner locking pin (KM 6333) for Vauxhall | Opel | Astra-G | Astra-H | Meriva (VXR) | Zafira-B 1.6 16v with engines Z16LET | Z16XEP 2003-2007 * Camshaft alignment pin OEM code KM 6340 * Tensioner locking pin KM 6333 * Suitable for Vauxhall/Opel/Astra G/ Astra H/ Meriva * 1.6 16v with engines Z16LET | Z16XEP 2003-2007 * Specialist engine timing tool Learn More

This set of tools enables the correct timing to be made when servicing the GM CHAIN engines 1.0 12v X10XE and 1.2 16v X12XE as fitted to Opel Agila and Corsa models For .0 12v X10XE and 1.2 16v X12XE engines Agila, Astra-G/H, Combo-C, Corsa-B,C,D, Meriva-A, Tigra-B With X10XE, Z10XE, Z10 XEP, X12XE, Z12XE, Z12 XEP, Z14XEL, Z14XEA engine codes Chain driven engines 1993-2010. Learn More

Engine timing tools set for General Motors/SAAB V6 petrol engines. 6 pieces – (Crankshaft and Camshaft Locking Tools sold separately) Included in the Set: RH Camshaft Locking Tool (Red) (Part No 3132) LH Camshaft Locking Tool (Green) (Part No 3133) Crankshaft Locking Tool (Part No 3115) Camshaft Timing Gauge (Part No 3116) Belt Holding Tool (Wedge) Holding Screw A set of timing tools for the V6 belt driven engine on 2.5/2.6/3.0 With raised edge on the tensioner pulley. Fitted to Vauxhall/Opel Vectra-B, Omega-B, Sintra, Calibra with engine codes X25XE, X30XE, Y26SE, Y32SE. Saab 9-5 3.0 V6 with engine code B308E OEM Codes: KM 800-10/800-20/800-1/800-2/800-30 Learn More

# This Timing Tool Set includes:- Crankshaft holding tool # Timing chain compressor # Injection pump puller # Shaft puller and the necessary timing pins for 2.5 TD5 engines * This kit has been specifically designed for the 2.5 TDS diesel engines * Also covers some Land Rover and Rover engines * Applications: 318TDS/325TDS/525TDS/725TDS (94-03) with 17 4 T1/25 6 T1 engine codes * Supplied in blow mould storage case * For chain driven diesel engines Learn More

This set of timing tools enables the correct timing position to be held when servicing GM 2.2 litre petrol and diesel engines plus 2.5DCi engines. Also for use on some Renault engines. This set of timing tools enables the correct timing position to be held when servicing GM Ecotec 2.2/2.5 litre engines. Also for use on some Renault engines For Interstar 2.2 and 2.5 Dci Engine codes G9U, G9T, (2002-2010) Metal case available Part No 4536 Learn More

A comprehensive tool kit for some older and modern Vauxhall | Opel models with petrol and diesel engines fitted with cam belts. Applications include: Agila | Ascona | Astra-F/G | Astramax | Belmont | Cavalier | Corsa-B/C | Frontera | Kadett-E | Midi | Monterey | Omega-B | Sintra | Vectra-A/B/C | Zafira This set contains a large array of engine timing tools for GM engines produced before the new Eco-Tec engine Full OEM cross reference is included Application included on CD Metal storage case available Part No 4553 Also used on Saab Learn More